Ehrlich Canadian

A couple of months ago I bought an Ehrilch Canadian on eBay and left it off to the side waiting for the summer temps to drop to be able to work in the garage at my bench. Now that we are back down to the 80’s I decided to get it done. It got a good ream, followed by a good retort before starting on the real work.

img_2194img_2270

img_2201img_2200

img_2272img_2271

It took about six times with new ever clear each time to get it to come out clear. I then used  several clean pipe cleaners to make sure I got all I could out. Once satisfied that it was clean I then put the stem into an Oxyclean bath to loosen up the oxidization.

Next it was time to get into the sanding of the stem to bring it back. Using the micro sanding sponges I wet sanded from 1200-6000 grit and finished by moving through the range to the 12000 sponge and finishing up with Brebbia’s pipe and stem polish.img_2444

The bowl was in good shape. After a salt and alcohol bath I used everclear and several makeup pads to wipe down the bowl and assess the color to use. I wanted to stay true to the original brown, so using Fibbing’s Leather Dye in the Dark Brown color, it got several coats that was flamed to set each time. Once satisfied with the color it was on to the buffer to complete the look.

img_2436img_2435

 

It’s a little bit hard to date this pipe. In looking a pipephil.com and pipedia.com I wound up more confused than educated. The stem is stamped with the E in a circle and just the name Ehrlich on the left side of the shank. Having seen a number of them in the forums I wanted to make sure to do this one proud!

Thanks for looking.

dscn0916img_2449img_2447img_2446

Advertisements

GBD Tapestry 9438 K

This is my latest eBay buy.

You can see that this is in need of more of a good cleaning than a reserection. The bowl is in good shape and the stem, while very oxidized, has no major dents or scrapes and the emblem is in good shape as well.

First up was to ream the bowl and give it an alcohol cleaning with pipe cleaners and Everclear. The stem I inspected and covered the logo with Vaseline to soak in an Oxyclean / water solution to loosen the oxidation. The next step was to immerse the bowl in isopropyl alcohol and let it soak for a couple of hours. When I took it out it went into a rice container to help dry it. The rice will pull out the moisture and dry it nicely. This is a trick electronics techs use when they get wet and you want to make sure it is dry before you power it up. Good to know if you drop a cell phone in water. When doing a salt and alcohol bath the rice also allows me to sit the bowl at the best angle to maximize the alcohol and not have it leak out.

The next several pictures show the progress on the stem, bringing it back to a nice shine. Starting with 220 grit flexible sandpaper and moving through the entire range of sponges up to 12000 grit you can see the finish come back. I used care not to get too close to the logo and damage it. I needed to use the pick to clear out some stubborn tar out of the bit.

I was thinking how I might give this a nice contrast to go with the finish contrast. I used the sanding sponges on the smooth areas that have geometric shapes. On the rusticated area I went with Black leather dye. I have long admired this combination in a number of pipe makers offerings. I still need to work on my technique to get the lines cleaner.

As I continue to learn more and more via experience I am encouraged by reading the blogs of Steve Laug and Upshallfan to see how veterans approach their work. A contributor to Reborn Pipes, Troy, has shown that you can be daring in reworking a pipe and get great results. Thanks to you all for the fine work you post.

London Hall Supreme

A while ago I bought this Dublin shaped bowl from eBay. It was in good shape and just needed a stem and good cleaning for it to resume service.

The bowl did not have much cake built up like it was rarely used. So I just gave it a light brushing out and a course of salt and alcohol and pipe cleaners in the shank. There was a slight burn on the top which I wiped with alcohol and soft cloth. One thing it did have was a fine threaded insert in the shank. I removed it before I began to work on it.

I selected an oval stem to replace the missing one and turned it to fit with the PIMO tenon tool. I’m still trying to master this and believe I now have at least a basic understanding of it.

Once the stem was fit I added a little color to the bowl by using a Dark Brown stain to it. After applying the stain I flamed it to set it and then wiped it down with alcohol to get to the desired richness.

The grain of the bowl is very nice and I did not want to hide it. There are no visible fills or defects in it and has a great character to it.

I then polished the stem with sanding sponges beginning with the 1200 to 4000 grits with water and then dry sanding the 6000 to 12000 grits. I followed this with Brebbia’s Pipe and Stem Polish to get the shine up.

When the bowl was ready I took it to the wheel and polished it with white diamond and then wax, added the stem and was very happy with the results.

After I posted this it was suggested that I put a bend in the stem. I have not done this before and had to get the idea settled first. I did some research to see how to do it.

I went to the Reborn pipes blog and found the method to use and it worked very well.

I took the stem and inserted a pipe cleaner into it. I used my paint removing heat gun to heat the stem evenly.

 

After I heated the stem I used my bottle of everclear to roll the stem over it to get the shape.

 

I just put a slight bend in the stem.

Thanks to Steve at Reborn Pipes for the suggestion and instructions on how to get this done.

No Name Flame and Hand Cut Billiard

Today  I am writing after reserecting a no name “Imported Briar”  bowl that I won on eBay a couple of month ago. When this pipe came to me it had no stem. I see that the seller has decided to sell the bowls and the stems separately. This causes me some heartburn as I was able to get the bowls but no stems.

The bowl top was not too bad and neither was the cake inside.

 

The first thing I did was to ream the bowl with my Castleford reamer. It cleaned up quite easily. Next I topped the pipe by sanding it on a hard bench surface with 320 sandpaper. I saved the dust for use in filling any damaged areas in future reserections.

 

When I redid this pipe I used an Army style stem and hand made the tenon with a dremel and sanding drum combination and medium grit sanding cloth.

 

 

Next I sanded the stem with micro sanding pads from 1200 to 4800 grits.

 

Next I went through 6000 to 12000 grits to clean the rest of the stem and bring up the shine.

 

Once the stem was finished I rubbed it down with Brebbia’s Stem & Bowl cleaner and buffed it on the wheel with white diamond.

 

Crusty Cleanups

I was asked by a friend to see if I could clean his pipes. He had a Savinelli Punto Oro 611, Marmet Bent and a Hardcastle Poker.

The three pipes were in OK condition. They had a lot of cake built up and the stems were oxidized.

HS B3

HM B2

HH B2

I reamed the three bowls with my Castleford reamer beginning with the smallest and moving slowly up to the largest.

HS B6

HM B5

HH A1

All cleaned up pretty well but the stem of the Hardcastle Poker was stuck and I had to put it into the freezer for several days to get it out.  When it came out it had cake buldup in the shank that had to come out. Each day I was able to move it a bit more and it came out on the third day.When it came out it had cake buildup in the shank that had to come out. 

The rims on all of the pipes needed some kind attention to clean them and repair small marks up.  Tar stains on the rims were heavy on both the Savinelli and the Hardcastle. I used alcohol on them with no result. I then used saliva to work into the rim and loosen up the tar. This work very well.

The Marmet and the Hardcastle had chips around the rims and I used Dark Brown and Black anilin dyes mixed 2:1.  Just a touchup was needed. I did this with a Q tip.

The stems were first given a bath of Oxyclean then wet sanded with 1200 to 4000 grit sponges, and dry ended with sponges up to 12000 grit.

DSCN0544

DSCN0545

I failed to photograph the complete cleaning of the stems.

When the stems were sufficiently cleaned inside and out, I used Brebbia pipe and stem polish on the stems, then reunited them with their bowls. Next they were buffed on the wheel with beeswax and buffed finally with a soft cloth.

HS A3

HM A2

HH A4

Howies Trio

They are now ready to be enjoyed again for a long time!

ManXMan Reserected

I recently went to a local flea market to see what or if I might find a treasure and came home with this little gem;

Man X Man Man1  Man3 Man4

It is a ManXMan that was made by the Laxley Pipe Company Ltd on the Isle of Man before the company closed it’s doors in 2002.  The pipe is made of Tanzanian Meerschaum which they were no longer able to get after 1985. The company made meerschaum pipes for Peterson until the supplies ran out.

First glance the pipe was not used very much. I put the stem in Oxyclean to clean up the oxidation and then worked on the clay that was on the side of the bowl.  I used the stiff brush to get it off and after reaming the slight cake from the bowl I gave it an alcohol and salt bath.

I used black super glue to fill the dings at the rim of the bowl and blend it into the original finish.

The stem was in pretty good shape when it came out of the bath and after using pipe cleaners to clean the inside I used sanding pads from1200 to 4800 grit to bring back the finish. I then used the buffing wheel and polished the stem and bowl and gave the pipe a bees wax to bring up the shine.

MXM re5 MXM re4  MXM re2 MXM re1