Ehrlich Canadian

A couple of months ago I bought an Ehrilch Canadian on eBay and left it off to the side waiting for the summer temps to drop to be able to work in the garage at my bench. Now that we are back down to the 80’s I decided to get it done. It got a good ream, followed by a good retort before starting on the real work.




It took about six times with new ever clear each time to get it to come out clear. I then used  several clean pipe cleaners to make sure I got all I could out. Once satisfied that it was clean I then put the stem into an Oxyclean bath to loosen up the oxidization.

Next it was time to get into the sanding of the stem to bring it back. Using the micro sanding sponges I wet sanded from 1200-6000 grit and finished by moving through the range to the 12000 sponge and finishing up with Brebbia’s pipe and stem polish.img_2444

The bowl was in good shape. After a salt and alcohol bath I used everclear and several makeup pads to wipe down the bowl and assess the color to use. I wanted to stay true to the original brown, so using Fibbing’s Leather Dye in the Dark Brown color, it got several coats that was flamed to set each time. Once satisfied with the color it was on to the buffer to complete the look.



It’s a little bit hard to date this pipe. In looking a and I wound up more confused than educated. The stem is stamped with the E in a circle and just the name Ehrlich on the left side of the shank. Having seen a number of them in the forums I wanted to make sure to do this one proud!

Thanks for looking.